'r8169: eth0: link down', while the physical link is actually plugged in:. status leds on Ethernet socket are green. status leds on the peer switch device to which the device is connected are green as well lspci reports: '01.00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet.

Realtek RTL8169/8110 Family Gigabit Ethernet NIC combines a triple-speed IEEE 802.3 compliant Media Access Controller (MAC) with a triple-speed Ethernet transceiver, 32-bit PCI bus controller,. Download Realtek 10/100/1000M Gigabit Ethernet PCI Driver 8.002 for Windows 8. OS support: Windows 8. Category: Networking. On 2014-04-02 13:22, gnejusz wrote: Dear MaintainerRTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 10) needs realtec module to work. Dmesg output 712.855476 r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded You are using the r8169 kernel module, not r8168. /nokia-1616-2-unlock-code-calculator-free.html. 08:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 03) worked out of the box. Auto tune evo 8.1 free download. Anyway, get the kernel headers first, then reconfigure the dkms packages you downloaded (sudo dpkg-reconfigure r8168-dkms, probably) and see if that works. Driver wanted - Realtek RTL8169/8110 Family Gigabit Ethernet NIC: Seviath: Linux - Wireless Networking: 3: 06:26 AM: Marvell 88e1116 PHY gigabit ethernet + PCI realtek RTL8169 S-32: Eivissa: Linux - Hardware: 2: 04:10 AM: realtek RTL8169/8110 Gigabit Ethernet on fedora core 4: angel115: Linux - Hardware: 9: 03:09 PM.

OK, I'm well aware that this is a well worn subject much discussed elsewhere, & indeed I've solved it myself many times before - but today I've spent hours on it - I need some help!!
I'm running CrunchBang Waldorf. (Debian Wheezy)
I've installed:
firmware-realtek
debhelper
build-essentials
ethtool
dkms
I have blacklisted r8169
Here is my /etc/modules

Code: Select all

loop
lp
rtc
r8168


Here is the relevent output from lspci -v

Code: Select all

03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 03)
Subsystem: Giga-byte Technology GA-EP45-DS5/GA-EG45M-DS2H Motherboard
Flags: bus master, fast devsel, latency 0, IRQ 12
I/O ports at de00 [size=256]
Memory at fbbff000 (64-bit, prefetchable) [size=4K]
Memory at fbbf8000 (64-bit, prefetchable) [size=16K]
[virtual] Expansion ROM at fbb00000 [disabled] [size=128K]
Capabilities: <access denied>


. ifconfig (note the absense of eth0)

Code: Select all

plenty@plenty-plentybox:~$ sudo ifconfig -a
[sudo] password for plenty:
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:106 errors:0 dropped:0 overruns:0 frame:0
TX packets:106 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:8980 (8.7 KiB) TX bytes:8980 (8.7 KiB)
wlan0 Link encap:Ethernet HWaddr 00:1f:1f:76:0d:c8
inet addr:192.168.0.126 Bcast:192.168.0.255 Mask:255.255.255.0
inet6 addr: fe80::21f:1fff:fe76:dc8/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:186140 errors:0 dropped:0 overruns:0 frame:0
TX packets:104744 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:193793880 (184.8 MiB) TX bytes:13404448 (12.7 MiB)
plenty@plenty-plentybox:~$


I have downloaded the following files;
r8168-dkms_8.035.00-2_all.deb
r8168-8.035.00.tar.bz2
This is the result when I try installing r8168-dkms_8.035.00-2_all.deb

Code: Select all

plenty@plenty-plentybox:~/downloads$ sudo dpkg -i r8168-dkms_8.035.00-2_all.deb
Selecting previously unselected package r8168-dkms.
(Reading database .. 105152 files and directories currently installed.)
Unpacking r8168-dkms (from r8168-dkms_8.035.00-2_all.deb) ..
Setting up r8168-dkms (8.035.00-2) ..
Loading new r8168-8.035.00 DKMS files..
First Installation: checking all kernels..
Building only for 3.2.0-4-amd64
Module build for the currently running kernel was skipped since the
kernel source for this kernel does not seem to be installed.
plenty@plenty-plentybox:~/downloads$


.and this is what happens with the r8168-8.035.00.tar.bz2

Code: Select all

plenty@plenty-plentybox:~/downloads$ sudo update-initramfs -u && cd ~/downloads && tar xvf r8168-8.035.00.tar.bz2 && cd r8168-8.035.00 && sudo sh autorun.sh
update-initramfs: Generating /boot/initrd.img-3.2.0-4-amd64
r8168-8.035.00/
r8168-8.035.00/autorun.sh
r8168-8.035.00/src/
r8168-8.035.00/src/rtl_eeprom.h
r8168-8.035.00/src/rtltool.h
r8168-8.035.00/src/Makefile
r8168-8.035.00/src/Makefile_linux24x
r8168-8.035.00/src/rtl_eeprom.c
r8168-8.035.00/src/r8168.h
r8168-8.035.00/src/r8168_n.c
r8168-8.035.00/src/r8168_asf.c
r8168-8.035.00/src/r8168_asf.h
r8168-8.035.00/src/rtltool.c
r8168-8.035.00/Makefile
r8168-8.035.00/README
Check old driver and unload it.
Build the module and install
make[2]: *** No rule to make target `clean'. Stop.
make[1]: *** [clean] Error 2
make: *** [clean] Error 2
plenty@plenty-plentybox:~/downloads/r8168-8.035.00$


Below is the contents of the 'Makefile' from the r8168-8.035.00 folder, if it helps.

Code: Select all

KFLAG := 2$(shell uname -r sed -ne 's/^2.[4].*/4/p')x
all: clean modules install
modules:
ifeq ($(KFLAG),24x)
$(MAKE) -C src/ -f Makefile_linux24x modules
else
$(MAKE) -C src/ modules
endif
clean:
ifeq ($(KFLAG),24x)
$(MAKE) -C src/ -f Makefile_linux24x clean
else
$(MAKE) -C src/ clean
endif
install:
ifeq ($(KFLAG),24x)
$(MAKE) -C src/ -f Makefile_linux24x install
else
$(MAKE) -C src/ install
endif


I don't understand what it means by 'Check old driver & unload it', as when I modprobe r8169 it ain't there.
I've also tried this;

Code: Select all

$ dget -u http://ftp.us.debian.org/debian/pool/main/r/r8168/r8168_8.035.00-2.dsc
$ cd r8168-8.035.00
$ dpkg-buildpackage -us -uc


. but the process stalls at this point;

Code: Select all

plenty@plenty-plentybox:~/tmp/r8168-8.035.00$ sudo su -c 'dpkg -i r8168-dkms_8.035.00-2_all.deb'
dpkg: error processing r8168-dkms_8.035.00-2_all.deb (--install):
cannot access archive: No such file or directory
Errors were encountered while processing:
r8168-dkms_8.035.00-2_all.deb


I've followed many guides, here is a sample;
How to fix RTL8111/8168B ethernet connectivity issues in Linux
http://www.dividebyzero.co.za/blog/2012/02/how-to-fix-rtl8168b-ethernet-connectivity-issues-in-linux/
The pain of an Realtek (RTL8111/RTL8168) ethernet card
http://unixblogger.wordpress.com/2011/10/18/the-pain-of-an-realtek-rtl8111rtl8168-ethernet-card/
It's been many moons since I last had to deal with this issue, having dealt with it on Ubuntu & Arch - each time it took hours upon hours to solve, but this time is unparelleled! I'm ashamed to admit that, after some years of linux use, I don't understand this. Someone please help me!!Hi community,
I have a problem with network configuration in Debian 10 stable.
In Debian, the download speed is around 1.5 mb/s, other OS gives around 40/50 mb/s

Rtl8169 Pci Gigabit Ethernet Controller Driver Debian 8 Iso

Upload speed is totally fine.

Rtl8169 Pci Gigabit Ethernet Controller Driver Debian 8600

Code: Select all

$ lspci grep -i ethernet
01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 15)

Code: Select all

$ sudo ethtool -i enp1s0
[sudo] password for ju:
driver: r8169
version:
firmware-version: rtl8168h-2_0.0.2 02/26/15
expansion-rom-version:
bus-info: 0000:01:00.0
supports-statistics: yes
supports-test: no
supports-eeprom-access: no
supports-register-dump: yes
supports-priv-flags: no


Rtl8169 Pci Gigabit Ethernet Controller Driver Debian 8 Upgrade

Code: Select all

$ sudo ethtool enp1s0
Settings for enp1s0:
Supported ports: [ TP AUI BNC MII FIBRE ]
Supported link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
1000baseT/Full
Supported pause frame use: Symmetric Receive-only
Supports auto-negotiation: Yes
Supported FEC modes: Not reported
Advertised link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
1000baseT/Full
Advertised pause frame use: Symmetric Receive-only
Advertised auto-negotiation: Yes
Advertised FEC modes: Not reported
Link partner advertised link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
1000baseT/Full
Link partner advertised pause frame use: Symmetric
Link partner advertised auto-negotiation: Yes
Link partner advertised FEC modes: Not reported
Speed: 1000Mb/s
Duplex: Full
Port: MII
PHYAD: 0
Transceiver: internal
Auto-negotiation: on
Supports Wake-on: pumbg
Wake-on: d
Current message level: 0x00000033 (51)
drv probe ifdown ifup
Link detected: yes

I tried switching the driver (r8169 -> r8168) without improvement.

Code: Select all

$ ip -s link
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
RX: bytes packets errors dropped overrun mcast
13422179 105621 0 0 0 0
TX: bytes packets errors dropped carrier collsns
13422179 105621 0 0 0 0
2: enp1s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP mode DEFAULT group default qlen 1000
link/ether 54:bf:64:87:a7:23 brd ff:ff:ff:ff:ff:ff
RX: bytes packets errors dropped overrun mcast
618841842 623332 0 0 0 8243
TX: bytes packets errors dropped carrier collsns
1033279718 1624347 0 0 0 0


Rtl8169 Pci Gigabit Ethernet Controller Driver Debian 8 Download

There is no write speed issue when I copy/paste a file locally, and no difference between protocols
Any advice where to look at?